/
Skyhawk Kiwi Operation (Pause Timer)

Skyhawk Kiwi Operation (Pause Timer)

Owned by Adison Hicks (Deactivated)
Last updated: Oct 07, 2019
1 min read

If you do not wish for your Skyhawk Kiwi to be triggered, you may pause the device. This disables your device from being triggered for a specified time. You may pause it for any length of time from 5 minutes to 24 hours. The pause will not take effect until the next time the Kiwi connects to the network. Pausing is recommended for when you do not wish to receive triggers in the next 24 hours. If you wish to disable triggers for longer than this, powering down the Kiwi is recommended.

Pausing your Skyhawk Kiwi:



  1. Make sure the Kiwi is powered on.

  2. Go into the app, and set the pause for the desired length of time.

  3. The pause will take effect upon the next trigger, and will automatically expire at the end of the specified time.

  4. You will receive a notification on your mobile device that a pause has been initiated.

Once you have set a pause on the app and the kiwi has been triggered, the pause is now permanent on the kiwi and will stay paused until the pause timer is complete. If you wish to erase the pause, you must do one of the following: Power down the Kiwi, Remove and reinsert the batteries on the Kiwi, or reset the Kiwi.