Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Current »
If you would like to change the IP, Subnet Mask, Gateway, or Connect-Back IP on the units display follow the Directions below:
Press Select - You should now be able to use the Up and Down arrow to change the number in the First Octet
Press Select when you are done with the octet - This will move the cursor over to the next octet
Continue to enter the numbers until you get to the end. Once that is done you will have to press select one last time.