How to change IP Settings From the LCD Display

Owned by Tyler Stapleford (Deactivated)
Last updated: Apr 16, 2019
1 min read

If you would like to change the IP, Subnet Mask, Gateway, or Connect-Back IP on the units display follow the directions below:


  1. Press Menu on the unit until you get to setting you would like to change

  2. Press Select - You should now be able to use the Up and Down arrow to change the number in the First Octet

  3. Press Select when you are done with the octet - This will move the cursor over to the next octet

  4. Continue to enter the numbers until you get to the end. Once that is done you will have to press select one last time

  5. Press Up to save the settings and reboot the unit