Setting Wireless password from iLink LCD Display

Owned by Tyler Stapleford (Deactivated)
Last updated: Apr 11, 2019
1 min read

  1. Make sure the antenna is connected and there is a wireless network nearby that you can connect to.

  2. Press Menu on the Display until you get to "Press Select to scan for WiFi", Press select.

  3. The unit should search for WiFi you can use the up and down arrow to select the correct network.

  4. When you find the right network press select. This should bring up a prompt to enter the password.

  5. Enter the first character of the Password. In order to move to the next character you must hold select and press the Up arrow at the same time to move Right, and the Down arrow to move left.

  6. Press Menu, The unit should ask if you want to save the WiFi. Press Up for Yes.

  7. The unit should reboot and you should get an IP on the unit if everything is correct