Factory reset Sonorous

Factory Reset:

A Factory Reset will reformat and erase all audio on the Sonorous.

Prior to February 2006 (Serial # beginning 0608 or prior; 06=year 2006 & 08=8th week)

1. Remove the CD from the Sonorous

2. Turn off the Sonorous (switch on back)

3. Unplug the Sonorous and wait 15 seconds

4. Plug the Sonorous back in

5. BEFORE turning the Sonorous on, press & hold the Monitor (speaker) button

6. Turn the Sonorous back on while still depressing the Monitor button

7. The Sonorous will begin a self-test & the status light will alternate between flashing green & orange

8. After about 30 seconds, you will hear the whirring sound stop & the status light will flash green (no

message/CD)

9. Release the Monitor button

10. Insert the CD. (If you've experienced difficulty with a CD you've supplied, insert the CD we include

with the Sonorous.) The Sonorous will begin loading the CD (the status light will flash orange after a few

seconds) & will begin playback when loading is complete (time of loading will vary depending on the size

of your audio file). *The status light will be solid green when functioning properly, with audio loaded.

Following February 2006 (Serial # beginning 0609 or later; 06=year 2006 & 09=9th week)

1. Remove the CD from the Sonorous

2. Turn off the Sonorous (switch on back)

3. Unplug the Sonorous and wait 15 seconds

4. Plug the Sonorous back in

5. BEFORE turning the Sonorous on, press & hold the reset switch (located on the back of the unit, below

& to the right of the “Volume” knob)

6. Turn the Sonorous back on while still depressing the reset switch

7. Once the status lights begin to cycle, let go of the reset button

8. The Sonorous will begin a self-test – the status light will alternate between flashing green & orange

9. After about 15 seconds, the status light will flash green (no message/CD)

10. Insert the CD. (If you've experienced difficulty with a CD you've supplied, insert the CD we include

with the Sonorous.) The Sonorous will begin loading the CD (the status light will flash orange after a few

seconds) & will begin playback when loading is complete (time of loading will vary depending on the size

of your audio file). *The status light will be solid green when functioning properly, with audio loaded.